Paper laminate is a common finish on many different types of products, from countertops to cabinets. While it is a durable and easy-to-clean option, paper laminate can start to show its age after a few years. If you are thinking about updating your home with a new look, you may be wondering how to remove paper laminate. In this blog post, we will provide a few simple steps on how to remove paper laminate. With the right tools and some elbow grease, you can update your home in no time.
Gather your supplies
In order to remove paper laminate, you will need the following supplies:
- A putty knife
- A hairdryer
- Soap and water
- A rag or towelFirst, use the putty knife to loosen a corner of the laminate. Once you have a small section lifted, direct the hairdryer on high heat at the edge of the laminate. Be careful not to hold the hairdryer too close to the surface, as you could damage it. After a few seconds, begin peeling back the laminate. If it is resisting, direct the hairdryer onto that spot again for a few more seconds. Continue peeling back the laminate until it is completely removed.
Once all of the laminate has been removed, clean off any adhesive residue with soap and water. Dry the surface with a rag or towel. Your surface is now ready to be used.
Heat up the iron
Ironing is a great way to remove paper laminate with a few simple steps. First, make sure that your iron is set to the correct temperature. If it is too hot, it can damage the laminate. Second, place a towel over the laminate to be removed. This will help protect the surface beneath it. Third, slowly run the iron over the towel. The heat will loosen the adhesive and the laminate should start to peel away. fourth, once the majority of the laminate has been removed, use a putty knife or other sharp object to remove any remaining pieces. fifth, if there are any stubborn pieces of laminate left, you can try using acetone or nail polish remover on a cotton ball to remove them.
Put the iron on the laminate
Before you begin, make sure that you have all of the necessary supplies. You will need an iron, a piece of cloth, and something to protect your surface. Place the iron on the highest setting and allow it to heat up. Place the cloth over the area that you would like to remove the paper laminate from. Iron over the cloth for 30-60 seconds. Remove the cloth and check to see if the paper laminate has begun to peel away. If it has, continue peeling it away until it is completely removed. If it has not, replace the cloth and continue ironing.
Wait for it to cool down
If you’ve just applied paper laminate to your furniture and it’s not quite dry, don’t worry. Just wait for it to cool down before you start removing it.
If the laminate is already dry, however, you’ll need to take a few extra steps. First, use a hairdryer to heat up the laminate. Then, use a putty knife or other sharp object to slowly peel back the laminate.
Take off the paper laminate
If you’ve ever wondered how to remove paper laminate, wonder no more! With a few simple steps, you can take off the paper laminate and have a beautiful finish.
First, you’ll need to gather your supplies. You’ll need a putty knife, a utility knife, sandpaper, and paint thinner. Once you have your supplies, it’s time to get started!
Start by using the putty knife to loosen a corner of the paper laminate. Once you’ve pried up a corner, use the utility knife to score along the edge of the laminate. Be careful not to cut into the wood beneath the laminate.
Once you’ve scored the entire perimeter of the laminate, use sandpaper to rough up the surface of the laminate. This will help the paint thinner adhere to the laminate and make removal easier.
Finally, apply paint thinner to a clean rag and rub it over the surface of the laminate. The paint thinner will dissolve the adhesive holding the laminate in place. Keep rubbing until the entire surface is covered and then peel away the laminate.
Repeat steps 3-5 if necessary
If your paper laminate is still not coming off after following steps 3-5, you can repeat these steps as many times as necessary. Just be patient and keep at it until the laminate starts to loosen and peel away from the surface of your furniture.
Removing paper laminate can seem daunting, but it’s actually a pretty simple process. With a little patience and the right tools, you can remove paper laminate in just a few steps. We hope our tips have helped you figure out how to remove paper laminate so that you can get the look you want for your project.